Connectivity; Connection Test - Jung FRWM-AR Betriebsanleitung

interval as the FRWM radio alarm.
5 The FRWM-AR is now successfully
integrated into the radio group.
f To end the learning mode, press the
configuration button briefly once,
or wait for 10 minutes.

5 Connectivity

With other radio group
participants:
You cannot set a radio group into
•
learning mode via the FRWM-AR!
Using the FRWM-AR, the
•
alarm of a radio group cannot
be muted or ended.
32
Operating Manual: FRWM - AR Alarm Relay

6 Connection test

The FRWM-AR cannot per-
form a connection test auto-
matically. However, you can use
the connection test function
of a FRWM to test the radio
connection to the FRWM-AR.
To start the connection test
(1) Press and hold the test/stop
button on a FRWM for approx.
12 seconds.
(2) All the participants in the radio
group will now produce a signal
one after another. The FRWM-AR
also acknowledges the connec-
tion test with a flashing red LED.
5 The connection test is then
successfully ended.
EN