Overview - Jung FRWM-AR Betriebsanleitung

3 Overview

3.1 Function
A FRWM-AR which is integrated into a
radio group, has a similar operation to a
FRWM. If an alarm is triggered in a main or
subgroup, the FRWM-AR is also triggered.
This triggering activates the following on
the FRWM-AR in the first step:
the Status-LED
•
the Buzzer
•
the relay itself
•
Depending on which end device or fire
alarm controller is connected to the
FRWM-AR, these get also activated via
triggering the alarmoutput of the relay.
If the alarm input is used, a signal is sent to
the respective radio group which results
in all the alarm devices in the radio group
sounding the alarm. If the radio group is
preceded by a common group / shared
radio group, their alarm devices are al-
so triggered. Using the FRWM-AR alarm
relay, you can extend an existing FRWM
radio group by an interface, e.g.:
EN
•
•
•
•
Operating Manual: FRWM-AR Alarm Relay
to a ventilation system
to a sprinkler system
to a lighting installation
or to other external devices
FRWM Radiolink
Smoke Alarm
FRWM-AR Alarm Relay
Push-button
27