SinePower
2.3
Operating the appliance safely
!
WARNING!
• Operate the device only if you are certain that the housing and the
cables are undamaged.
• Even after the fuse triggers, parts of the inverter remain live.
• Always disconnect the power supply when working on the device.
A
NOTICE!
• Make sure the air inlets and outlets of the device are not covered.
• Ensure good ventilation.
• Do not connect the 230 V output of the inverter (fig. 5 1, page 5) to
a different 230 V source.
3
Scope of delivery
• Sine wave inverter
• 4 holders
• Instruction Manual
4
Intended use
The SinePower inverters are used to convert a direct current of 12 V or 24 V into a
230 V AC supply of 50 Hz.
• 12 V:
SinePower MSI212
SinePower MSI412
• 24 V:
SinePower MSI224
SinePower MSI424
Rechargeable devices with USB interface can be charged via the USB port (5 V,
2000 mA).
This device is exclusively intended for vehicle use.
EN
Scope of delivery
9