Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Fit the lower poles to the leg of the trampoline. Insert the bolts into the pre-drilled holes from the
outer side of the legs of trampoline. Place the washer on the inner side and secure the nut with the
spanner. Repeat this with all lower poles.
•
Mount the top fittings onto the upper pole. Fit the upper poles by pushing them down to the readily
assembled lower poles.
•
Place the net on the inner side of the fitted poles. The zipper must be at the bottom and polling out-
wards.
•
Tie the net to the rings of the mat. Make sure you
keep the zipper on the net closed when the trampo-
line is in use. Remember that the net is not designed
for jumping into gain more speed or for taking off
faster! Check regularly that the net has been fitted
correctly, Tighten up assembly fittings.
16
Werbung
Inhaltsverzeichnis
