Herunterladen Inhalt Inhalt Diese Seite drucken

Assembly; Preparation; Required Tools; Assembling The Bbq - tepro Billings Bedienungsanleitung

Edelstahl klappgrill
Vorschau ausblenden Andere Handbücher für Billings:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

– Check the stability of the screws prior
to each use. If necessary, tighten all of
the screws again to ensure the BBQ is
standing securely.
Attention Risk of damage!
Do not use any strong or
grinding solvents or abrasive
pads, since these can attack
the surfaces and leave behind
scrape marks.

Assembly

Preparation

Danger Risk of injury!
Failure
to
instructions
problems and risks while using
the BBQ.
– Follow all of the assembly instructions
listed here.
1. First read through the assembly
instructions completely.
2. Allow
yourself
enough
assembly and find an even working
space of one to two square meters.
3. Small parts such as handles will
probably be preassembled.
4. Look out for sharp corners and wear
protective gloves for assembly.

required tools

1 x Phillips screwdriver
1 x Adjustable spanner
Alternatively, instead of the spanner you
can also use pliers to fasten the nuts.

Assembling the BBQ

1. unpack BBQ
2. Fasten the support legs to the
follow
these
3. Fasten the handle
can
lead
to
4. Fasten the locking hook
time
for
5. Insert the charcoal plate and place
6. Fold out the BBQ
Unpack the BBQ and dispose of
all packaging materials. Keep the
packaging materials out of the reach of
children and dispose of them according
to regulations after BBQ assembly.
Pay attention to the illustration of the
BBQ during assembly.
housing
Fasten the two support legs (4) to both
sides of the housing (2) with the M5x30
screws (B) and M5 nuts (C) .
Fasten the handle (1) to the upper
part
of
the
housing
M5x10 screws (A).
Open the upper part of the housing as
far as is shown in the illustration of the
BBQ. Hook the locking hook (3) into
the holes in the housing (2).
the BBQ grate.
Place the charcoal plate (6) on the
bottom of the housing. Place the BBQ
grate (5). Hook the BBQ grate handle
(7) to the crossbar on the BBQ grate.
If a larger grilling surface is required,
the BBQ can be folded out so that
the upper part can be used as a
grilling surface. The handle serves as
a support leg. To fold out the BBQ,
remove the locking hook (3).
t
with
the
16

Werbung

Kapitel

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Billings

Inhaltsverzeichnis