Werbung
Verfügbare Sprachen
Verfügbare Sprachen
•
Use the electrical socket with rated current of 10A or over. Do not share the same electrical socket
with other high power electric appliance at the same time.
•
Make sure that the knob is on "MIN" position before plug in. Check that the supply voltage is
220-240V~50/60Hz.
•
Close supervision by an adult is extremely necessary when this appliance is used by or near
children or invalids.
•
Put water and/or food in the bowl and make sure that the total amount of water and /or food
should not exceed 80% of the capacity to avoid overflowing.
•
This appliance is for melting cheese, chocolate and warming or heating sauces and for grilling or
frying foods.
•
Put the pot or roasting pan onto the heating plate and make sure the bottom fully contacts with
the heating plate.
•
Turn the knob to "MAX" position and the indicator light is on. The unit starts to work.
• It is normal that the indicator light may cycle off and on due to the thermostatic control. This
cycling controls the temperature of the pot until the food is well cooked.
• Please turn the knob to "MIN" position after use to turn off the power and the indicator light is off.
•
Put the appliance on a stable and heat-resistant surface for use.
• Please do not put the appliance on a flammable or explosive surface such as wooden, plastic or
glass surface) or near the corner of the wall.
•
Please do not put the cord under the carpet, blankets. Always keep the power cable away from
walkway in room.
•
Never try to touch, clean or move the metal parts before the appliance is completely cooling down
to avoid being burned. Only move the appliance by using the handle.
•
Please do not use an extended power cord or a power socket with rated current less than 10A.
•
To prevent the risk of electric shock, do not use the set with broken power cord or broken plug.
Never try to repair the cable or plug by yourself. Please take the damaged set to your local
authorized maintenance center
•
Turn the knob to "MIN" position before plug or unplug the appliance.
•
Appliances are not intended to be operated by means of an external timer or separate
remote-control system.
•
This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
•
Always engage a recognized, trained service engineer if the appliance or the cable is damaged,
malfunctions have occurred and/or the appliance requires repairs.
•
To prevent the risk of electric shock, do not use the set with broken power cord or broken plug.
All repair works must be made by a professional (authorized distributor). Never try to repair the
cord or plug by yourself. Please take the damaged set to your local authorized maintenance center
for repairing or change.
•
Do not try to repair the broken fuse by yourself, the user should take the set to your local
authorized maintenance center to replace it with the new one.
•
Never try to touch the hot surface of this appliance before it is completely cooled down.
•
Please do not immerse the body to any liquids.
•
Clean the appliance with the mild cleaner or gel-like cleaner by using soft cloth. Please do not
use hard brushes, scratchy materials and/or alcohol, petrol or any organic cleaner for the cleaning
purpose to protect the nonstick coating.
5
PREPARATION BEFORE USE
Operation
Safety Cautions
Cleaning and Maintenance
Werbung
