Operating Elements And Connections - Monacor AHD-100TEST Bedienungsanleitung

Multifunction Tester
These instructions are intended for installers
of video surveillance systems . Please read the
instructions carefully prior to operation and
keep them for later reference . All operating
elements and connections described can be
found on page 2 .
Contents
1 Operating Elements and Connections � � 14
2 Safety Notes � � � � � � � � � � � � � � � � 15
3 Applications and Accessories � � � � � � 16
4 Operation � � � � � � � � � � � � � � � � � 16
4�1 Connecting the battery � � � � � � � � � � � � 16
4�2 Charging the battery � � � � � � � � � � � � � 16
4�3 Attaching the neck strap � � � � � � � � � � � 17
5 Temporary Power Supply � � � � � � � � � 17
6 Operation � � � � � � � � � � � � � � � � � 17
6�1 Basis settings � � � � � � � � � � � � � � � � 18
6�1�1 Date and time � � � � � � � � � � � � � � 18
6�1�2 Automatic switch-off� � � � � � � � � � � 18
6�1�3 Keypad tone � � � � � � � � � � � � � � � 18
6�1�4 Backlight brightness � � � � � � � � � � � 18
6�1�5 Menu language � � � � � � � � � � � � � 18
6�2 Testing a video signal � � � � � � � � � � � � 18
6�3 Testing an audio signal� � � � � � � � � � � � 19
6�4 Generating a test pattern� � � � � � � � � � � 19
6�5 PTZ control� � � � � � � � � � � � � � � � � � 19
6�5�1 Configuring the interface � � � � � � � � 20
6�5�2 Address search � � � � � � � � � � � � � 20
6�6 Data monitor� � � � � � � � � � � � � � � � � 21
6�7 Cable test � � � � � � � � � � � � � � � � � � 21
7 Specifications � � � � � � � � � � � � � � � 22
14
1 Operating Elements
and Connections
1 RS-485 /422 contacts for remote control of a
camera and for reception of control signals;
plug-in screw terminals for connection are
provided
2 Video signal output VIDEO OUT (BNC jack)
for connecting a monitor
3 Video signal input VIDEO IN (BNC jack) for
connecting a camera with AHD or composite
video signal
4 Charge indicator; lights up when the battery
is being charged
5 Transmission indicator for control signals
6 Reception indicator for control signals
7 Power indicator for operation via power sup-
ply unit or via mini USB port (25)
8 Pins on the left and on the right to attach
the neck strap provided
9 RJ45 jack UTP CABLE TEST for testing a net-
work cable
Connect the test adapter provided to the
other end of the cable .
10 Pushbutton RESET; to reset the tester, use a
thin object to press the recessed pushbutton
11 Output with 12 V direct voltage, e . g . for
temporary power supply of a camera to be
tested
12 Jack to connect the power supply unit pro-
vided for mains operation and for charging
the internal battery
13 Battery compartment cover
14 Tilt stand
15 LCD screen
16 Button MODE to call up the OSD menu
17 Button SET to call up settings