Lupine BLIKA Bedienungsanleitung Seite 14

Helmet Mount
No tools are required for mounting this lamp. The helmet mount is already mounted to the lighthead.
You can attach this helmet light to almost any kind of helmet with ventilation openings.
With the provided extension, the battery may
be carried in your jersey or backpack. The velcro
strap also provides the possibility to mount the
battery directly on the helmet.
26 Blika
First attach the thin velcro with the Lupine logo
to one side of the helmet mount.
Then pull the other end of the velcro through the
ventilation openings available on your helmet and fi x
it on the other side of the helmetmount. Tighten the
velcro to avoid slipping of the lamphead during use.
Insert the lamphead into the FrontClick mount.
(Video support YouTube channel "LupineLights")
Insert the lamphead into the FrontClick mount of
the headband.
(Video support YouTube channel "LupineLights")
With the provided extension, the battery
may be carried in your backpack, a pocket
etc.
The FastClick backpart of Blika X 4 can be
replaced by a cable guide backpart.
Headband Mount
The FastClick battery have to be attached
to the FastClick mount on the headband
with the cable looking downwards.
Matching Batteries:
Art.No. 884 2.0 Ah
Art.No. 881 2.0 Ah Smartcore
Art.No. 835 3.3 Ah
Art.No. 842 3.3 Ah Smartcore
Blika Blika 27 27