Operation; Meaning Led Colours - Lupine BLIKA Bedienungsanleitung

Operation

Initialization & voltage display:
After connecting the lamp to the battery, the software runs a selftest; the lamp itself as well as the
red and blue LEDs in the switch light up once. The
LEDs, as follows:
 The blue LED flashes once for each volt; and then
 The red LED flashes once for each 1/10 of a volt.
Example: The LED flashes seven times blue and five times red = battery voltage is 7.5 V.
Interpreting the voltage display:
more than 8.0 V battery is fully charged

7.1 to 7.8 V battery needs charging

6.5 to 7 V battery is not ready for use

20 Blika
battery voltage is indicated by the blue and red
Control concept:
Operation via the buttons of the lamphead:
Top button: Operation of the main programs (see page 9)
Lower button: Operation of the special LEDs (Redlight, Greenlight, Spotlight, Diffuselight)
Turn on:
The first press of the button switches on the light with maximum power. The blue LED is illuminated.
Switching:
Each quick push of the button switches through the dim levels.
Turn off:
To turn off the lamp, keep the button pressed.
Note: The light outputs the maximum amount of light only if airflow lowers the temperature of
the light sufficiently. If the light is not cooled by airflow, its power is reduced
prevent the LEDs and electronic elements from overheating.
Meaning of LED colors
incrementally to
Blika 21