Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
PNEUMATIC TACKER, STAPLES
12-25MM
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europeís leading suppliers.
All products delivered to you by Ferm are
manufactured according to the highest standards
of performance and safety. As part of our
philosophy we also provide an excellent customer
service, backed by our comprehensive Warranty.
We hope you will enjoy using this product for
many years to come.
The numbers in the text refer to the diagrams
on pages 2-3.
Read the operating instructions carefully
before using this device. Familiarize
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents
1. TECHNICAL SPECIFICATIONS
Technical data
Air pressure
Max. staple size
Package contents
1 Air stapler
1 Bottle machine oil
1 Strip fasteners 22 mm
1 DIN coupling
1 Instructions for Use
1 Warranty card
1 Safety instructions
4
2. SAFETY INSTRUCTIONS
Explanation of symbols
Note carefully the following supplementary
points for safe operation of the air stapler, as
well as the other cautions in these instructions
for use.
• Use the air stapler solely for the purpose for
which it was intended.
• Never use the air stapler in a way that could
lead to a fastener being fired at the user or
bystanders.
• Do not use the air stapler as a hammer.
• The air stapler should only be carried by the
handgrip. Never carry the air stapler by the air
hose.
• Never make any unauthorised changes or
modifications to the design or the function of
the air stapler.
• At all times, be aware that incorrect use can
lead to serious injury to yourself and others.
• Never leave the air stapler unattended with a
connected air hose.
• Never use the air stapler whenever there is no
legible warning label affixed to the appliance.
4 -7 bar (60-100 psi)
Special safety instructions for air tools and
1.05x5.1x0.58 mm
compressors
• For proper operation of the machine with
a full continuous load under maximum
operating pressure, please make sure that the
temperature of the working environment in an
enclosed area is not more than +25°C.
• It is recommended to use the compressor
with a maximum operation of 70% in one hour
under full load, to allow for proper operation of
the product over time.
Indicates potential for bodily harm,
fatality or risk of damaging the machine,
in the event that the instructions in this
operator's guide are ignored.
Wear ear and eye protection
Lubricate the appliance.
Werbung
Kapitel
Inhaltsverzeichnis
