Shut-Off Delay; Cleaning Stop - WimTec Santec ECOLINE 9 V Montage- Und Bedienungsanleitung

Configuring the functions

Shut-off delay:

all programs
In the programs 1 (default) and 7 (reduced range) the delay time is 1s.
For all other programs the delay time is 2 s.

Cleaning stop:

Programs 3 and 4
Serves to disable the fitting prior to cleaning.
Enable cleaning stop
Approach the infrared sensor
with your hand. The
sensor LED starts flashing, and
water begins to flow from the
faucet. After flashing 5 times,
the water flow is stopped,
and the cleaning stop is
enabled.
ECOLINE
Disable cleaning stop
The fitting will resume normal
operation 3 min after the
sensor has remained un-
triggered.
To instantly end the cleaning
stop, perform the same steps
used to enable the function.
After flashing 3 times the
cleaning stop is disabled.
5 x 3 x
SanTec ECOLINE
Washbasin fitting
EN
27