LEITZ complete Bedienungsanleitung Seite 6

How to check the battery level 4
How to pair the speaker with a device
4. Press button G for two seconds to turn
on the speaker. While the speaker is
searching for an already paired device,
the LED on grill H blinks green/red.
5. Activate the Bluetooth search mode on
your device
6. On your device, select the speaker
(displayed as Leitz 6519).
7. Enter 0000 as a code or password, if
asked. Once the connection is
established, the LED on grill H lights
a steady green. Audio reproduction
and transmission and control are now
carried out through the speaker.
How to control audio via Bluetooth
Objective
Speaker on
Skip to the next
track
Skip to the prev.
track
Adjust the volume
Stop playback
How to control audio via cable
connection 5
1. Connect the cable C to the audio
output of your device.
2. Connect the micro-USB plug of the
cable C to the micro-USB connector N
on the speaker.
3. Press button G for two second to turn
on the speaker.
4. Use your device to control playback.
To adjust the volume, use button L or
button M on the speaker.
2
Action
Press button G
for two seconds
Briefly press
button M
Briefly press
button L
Press and hold
button M or
button L
Press button K
How to control incoming phone calls on
your paired device
Objective
Answer incoming
call
Reject incoming
call
End a call
Redial
Mute microphone
How to charge a device via the power
bank 6
1. Make sure the speaker is charged.
2. Connect the device you wish to charge
to the USB connector Q with cable B or
the cable supplied with your device.
Disposal
• The symbol on the packaging
indicates that the packaging is
made of PAP.
• Batteries may not be disposed of
with the usual domestic waste.
They may contain toxic heavy
metals and are subject to
hazardous waste regulations. For
this reason, dispose of used
rechargeable batteries at a local
collection point.
RED compliance
Hereby, Esselte Leitz GmbH & Co KG
declares that the radio equipment type
Bluetooth device is in compliance with
Directive 2014/53/EU. The full text of the
EU declaration of conformity is available
at the following internet address:
www.leitz.com.
EN
Action
Press button K
Press and hold
button K for two
seconds
Press button K
Quickly press
button K twice
Press button J.
The LED status
indicator will light
steadily red.