Flott TB 10 plus Handbuch Seite 16

Enter Sub menu
Turn-off machine and power supply
Display black
Turn on power supply and push control knob approx. 5 sec.
Display of sub menu:
FLOTT version:........
Serial no:...........
turning Unit: mm/inch
pushing List of errors:
Spindle stop: off/on
Service passwort:
Exit menu
Spindle stop function (enter sub menu)
"Spindle stop" function: on – push turning knob
and exit menu
I
START Drilling/Tapping
After tapping/drilling and guiding the spindle upwards the spindle stops
turning 0.3 mm(Display Drill depth: - 0.3.mm) away from zeropoint.
Piece counter function (enter sub menu)
When starting the piece counter commences with "0" and counts higher when
reaching the nominal depth. When turning off the machine the counter is
reset to "0".
During operation the counter can be reset to "0" by pushing the zeropoint
button for approx. 3 sec.
Attention: The zeropoint is also adopted for the digital depth display.
212516 D/GB
GB
16