Maintenance; Maintenance Activities; Cleaning; Disposal - Zipper ZI-FS115 Bedienungsanleitung

14

MAINTENANCE

14.1

Maintenance activities:

Make sure that repairs to the motor and the machine are performed by qualified personnel.
Make sure that the plug is removed from the electrical outlet before performing maintenance.
14.2

Cleaning

Cleaning: The use of paint thinners, gasoline, corrosive chemicals or abrasive
cleaners will result in damage to the surface!
Therefore: When cleaning, use only mild detergent
14.3

Disposal

Do not dispose of your waste in the ZI-FS115. Contact your local authorities for
information regarding the available disposal options. When replace your old unit
with a new one at your local dealer, is obligated to take back your old equipment
free of charge for the purpose of proper disposal.
15

TROUBLESHOOTING

Disconnect the machine from the power supply prior to any checks performed at the
machine itself!
Trouble
Engine will not start
Saw blade wobbles
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-FS115
N O T E
Possible Cause
 Plug is damaged / defective
 cutting wheel shaft
MAINTENANCE
Solution
 Renew plug from electrical
specialist
 Check ball bearings, shaft,
flange and nut.
 Replace if defective
17