Safety Instructions; Explanation Of Symbols - Sartorius YDP30 Betriebsanleitung

Safety Instructions

4 Operating Instructions YDP30
1. Safety Instructions
1. Please read this information carefully.
2. Keep these instructions in a safe place for future use.
3. Before cleaning the device, it should always be disconnected from the power
supply. Do not use any liquid or aerosol cleaning agents. A damp cloth is most
suitable for cleaning.
4. The power socket should be close to the device and easy to access.
5. The device must be protected against moisture.
6. Make sure that the device is securely positioned during set-up.
If it tips over or falls to the floor, it could be damaged.
7. When connecting to the power supply, it is important to note the connected
loads.
8. This device can be operated at ambient temperatures not exceeding 40°C.
A CR2032 lithium battery is installed in the main board.
Risk of explosion if battery is replaced by an incorrect type.
Dispose of used batteries according to the manufacturer's instructions.

Explanation of Symbols

The following symbols are used in these instructions:
t
Indicates a required action
y Describes what happens after you have performed a particular step
1. Perform steps in the specified order
2.
– Indicates an item in a list