Herunterladen Inhalt Inhalt Diese Seite drucken

Operation; Troubleshooting; Warranty - Kärcher CV 38/2 Originalbetriebsanleitung

Vorschau ausblenden Andere Handbücher für CV 38/2:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

Operation

Electronic brush control
The electronic brush control continuously
monitors the working of the brush.
No light
Brush is working properly.
Orange light is glowing
Set the adjustment knob for pile height
to the lower pile height.
Orange light also glows at lowest
level
Replace brush.
Transport
Caution
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.
Caution
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Troubleshooting

Danger
First pull out the plug from the mains before
carrying out any tasks on the machine.
Motor does not run
No electrical voltage.
 Check cables, plugs, fuse, and socket.
Thermostat switched off the motor be-
cause of overheating
 Pull mains plug, replace blocked filters,
or remove blockage from the suction
hose.
The unit is operational again after it has
cooled down.
16
Storage
Unsatisfying suction result
 Check the brush for blocking objects.
 Remove obstructions from brush head,
suction pipe and suction hose.
 Replace the filter bag.
 Replace blower filter and motor protec-
tion filter.
 Check the pile height adjustment knob
for correct adjustment.
 CV 38/2 only: The brush must be re-
placed when it is worn out. The degree
of wear is shown by a comparison with
the indicator bundle of a different col-
our. The brush must be replaced when
the black bristles are at the same level
as the red ones.
The red indicator lamp on the filter
 Remove obstructions from brush head,
suction pipe and suction hose.
 Replace the filter bag.
The orange indicator lamp - Elec-
tronic brush control is ON
 Set the adjustment knob for pile height
to the lower pile height.
The orange indicator lamp - Elec-
tronic brush control is also ON at
 Replace brush.
The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
– 2
EN
housing is ON
lowest level

Warranty

Werbung

Inhaltsverzeichnis

Fehlerbehebung

loading

Diese Anleitung auch für:

Cv 48/2

Inhaltsverzeichnis