EN
2
Test adjustability of spray intensity.
3
Test shower water temperature.
ü The shower water is noticeably warm.
ü The device performs a shower cycle.
Pressing the <Shower> button again
interrupts the shower cycle.
ü After completing the shower cycle, the
spray arm retracts.
ü The device performs post-rinsing.
ü The dryer functionality starts after the
shower procedure.
If the shower water remains cold, the
device is defective. Inform customer
service.
22
Testing the Lady shower
Prerequisite
– A hand is placed flat on the marked position of
the WC seat.
– The LED on the lateral control panel lights up
blue and the odour extraction unit runs. A user is
detected.
4
Press the <Shower> button on the lateral
control panel for 2 seconds.
00:00:02
ü The device performs pre-rinsing.
ü The spray arm extends.
ü The Lady shower starts. A small amount
of water drains into the WC ceramic
appliance via the overflow. The Lady
shower is active for 30 s econds.
ü The device performs a shower cycle.
Pressing the <Shower> button again
interrupts the shower cycle.
ü After completing the shower cycle, the
spray arm retracts.
ü The device performs post-rinsing.
ü The dryer functionality starts after the
shower procedure.
18014400418479371-1 © 05-2017
967.305.00.0 (01)