Miditech MIDI THRU 4/ FILTER Bedienungsanleitung Seite 31

Default Settings
The device comes out from the factory with default settings,
and when you press the PANIC button for over 10 seconds, it
also reset as this default settings.
The PC editor with the default setting when running.
Or could load the file
MIDI Channel 1 (range :1 to 16)
Note Transpose 0 (range: -11 to 11)
Note Velocity 100 (range 1 to 127)
Filter CC ALL
All CC are filter enabled
For the filter one CC table:
1 = (CC0) Bank Select
2 = (CC1) modulation wheel
3 = (CC2) breath
4 = (CC75 portamento time
5 = (CC7) volume
6 = (CC10) pan
7 = (CC11) expression
8 = (CC64) damper pedal
9 = (CC65) portamento ON/OFF
10 = (CC66) sostenuto pedal
11 = (CC67) soft pedal
12 = (CC80) reverb program
13 = (CC81) chorus program
14 = (CC91) reverb level
15 = (CC93) chorus level
16 = (CC120) all sound off
31