Miditech MIDI THRU 4/ FILTER Bedienungsanleitung Seite 19

Switch 3: Velocity On/Off
How to turn on/off velocity:
Set switch 3 to ON, note with velocity
Set switch 3 to OFF, note with fixed velocity
If at ON position, any NOTE ON event should change to
specified velocity. (fixed velocity).
Switch 4: Program
How to filter program changes:
Set switch 4 to ON, all program change and bank select are
disabled
Set switch 4 to OFF, all program change not filtered
Switch 5: Controller
How to filter controller change:
Set switch 5 to ON, the specified controller are disabled
Set switch 5 to OFF, all controller change not filtered
If at ON position, any CC event should filter by the specified
mode. There are 12 CC filter mode.
CC Filter Mode 1: The system will check the CC Filter Table,
all 128 CC event could be specify filter ON/OFF.
CC Filter Mode 2 to 12, just filter one CC event.
E.g.
Current CC Filter Mode is 1, in the CC Filter Table, CC0 is
ON, CC1 is OFF, CC2 is ON, etc.
If MIDI IN a CC0 event, in the Filter Table, it's filter ON, so,
it'll not send MIDI OUT.
If MIDI IN a CC1 event, in the Filter Table, it's filter OFF, so,
it'll send MIDI OUT.
19