Miditech MIDI THRU 4/ FILTER Bedienungsanleitung Seite 20

E.g..
Current CC Filter Mode is 10, it's filter CC number is 7.
If MIDI IN a CC7, it should not send MIDI OUT, but other
CC event allow to send MIDI OUT.
Switch 6: Pitch Bend
How to filter pitch bend or after touch:
Set switch 6 to ON, pitch bend of after touch are disabled
Set switch 6 to OFF, don't filter pitch bend and after touch
E.g.
The system filter pitch bend flag is OFF, any pitch bend event
should sent MIDI OUT, even the switch 6 is ON.
E.g.
The system filter pitch bend flag is ON, any pitch bend event
should not send MIDI OUT.
E.g.
The system filter after touch flag is ON, any key after touch or
channel after touch event should not sent MIDI OUT.
Switch 7: System
How to filter system message:
Set switch 7 to ON, specified system are disabled
Set switch 7 to OFF, don't filter system message
If at ON position, it should filter any MIDI system and
common event. (F0H, F1H, F2H, F3H, F6H)
For System Exclusive event, there is a mode to just filter
specified SysEx.
20