Miditech MIDI THRU 4/ FILTER Bedienungsanleitung Seite 26

For the filter one CC table:
1 = (CC0) Bank Select
2 = (CC1) modulation wheel
3 = (CC2) breath
4 = (CC75 portamento time
5 = (CC7) volume
6 = (CC10) pan
7 = (CC11) expression
8 = (CC64) damper pedal
9 = (CC65) portamento ON/OFF
10 = (CC66) sostenuto pedal
11 = (CC67) soft pedal
12 = (CC80) reverb program
13 = (CC81) chorus program
14 = (CC91) reverb level
15 = (CC93) chorus level
16 = (CC120) all sound off
17 = (CC121) reset all controller
18 = (CC123) all notes off
4. To confirm the changed setup, press the Panic button a short
time again. After this the box starts again with the work mode.
Note: with the PC editor software, you can specify to filter any
combination of them by check the items. The Mode 13-18 can
only setup by the MT4 editor software.
How to select filter pitch bend or after touch:
1.Hold down and press the PANIC button minimum 5 Seconds
while plugging the MIDI In to power the system. The LED
26