Siemens SIMATIC NET CP 5511 Installationsanleitung Seite 44

Performance and Functions
PCMCIA Port
The PCMCIA port requires Card and Socket
Services to operate. These require 4 Kbytes of
free memory, in Windows 95/98 they are included
in the operating system.
To operate the CP 5511 under Windows NT 4.0,
you also require the CardWizard from Systemsoft
Version 5.2 or higher as additional software. This
is a separate software package that must be
installed prior to installation of the CP 5511.
Information on the Software CardWizard is not
included in this documentation.
You will find the Technical Description and the
Software ordering data (Cardwizard V5.20.05) at
the following link:
http://support.automation.siemens.com/WW/view/en/
313654593 or 77727
This is on your STEP 7 or SIMATIC NET CD in
the CP_5511 folder. The CardWizard can be used
only with Softnet V5.0 and STEP 7 V5.0 and
higher.
CP 5511 Installation Instructions/Product Information
16
A5E00102069–04