moeve franklin Handbuch Seite 28

Chainring
The chainring can be removed by unscrewing the four chainring screws [Illust-
ration 10]. This requires a 3mm Allen key. When removing the chainring, be care-
ful not to get caught in the pedal crank or pedal [Illustration 11]. When mounting
the chainring, please ensure correct alignment [Illustration 11]. The chainring
screws are tightened with a torque of 10 Nm. Avoid over-tightening the screws.
The chainring cogs are alternatingly narrow and wide. When fitting the chain,
please ensure that narrow and wide chain links rest on the corresponding cogs
[Illustration 12]
Illustration 10
EN
29
Illustration 11
Illustration 12