moeve franklin Handbuch Seite 27

EN
28
cyfly®
The bearings and gears of cyfly® are designed to be 20.000 km maintenance-free.
The chainring is subject to normal wear and tear. In order to ensure the optimum
service life of the chainring, attention should be paid to the chain lengthening
at regular intervals. We recommend a chain gauge. Please also pay attention to
the service intervals for the oil change (see page 19). Should problems occur no-
netheless, please turn to your MÖVE specialist dealer or contact Möve directly at
any time.
• a Carrier
• b Pedal crank
• c Offset
• d Chainring with guar
d
a c
b
Chainguard
The chainguard can be removed by unscrewing the four chainguard screws. This
requires a 3mm Allen key [Illustration 8]. When removing the chainguard, be ca-
reful not to get caught in the pedal crank or pedal. When mounting the chaingu-
ard, please ensure correct alignment (recess at the pedal [Illustration 9]). The
chainguard screws are tightened with a torque of 3 Nm. Avoid over-tightening
the screws.
Illustration 8 Illustration 9