DJI Hex Charger Bedienungsanleitung Seite 4

Disclaimer
Thank you for purchasing the DJI
carefully before using this Product. By using this Product, you hereby agree to this disclaimer and signify
that you have read it fully. Please use this Product in strict accordance with the manual and be sure to
pay attention to the Warnings. SZ DJI TECHNOLOGY CO., LTD. and its affiliated companies assume no
liability for damage(s) or injuries incurred directly or indirectly from improper use of this Product. Misuse
includes, but is not limited to, using unapproved chargers, charging unapproved batteries, short-circuiting,
overheating, introducing foreign materials into the Product, or touching the terminals with skin or metal.
Refer to the Safety Guidelines and Disclaimer, Intelligent Flight Battery Safety Guidelines, and User Manual
for applicable information not herein contained.
DJI is a trademark of SZ DJI TECHNOLOGY CO., LTD. (abbreviated as "DJI") and its affiliated companies.
Names of products, brands, etc., appearing in this manual are trademarks or registered trademarks of their
respective owner companies. This Product and manual are copyrighted by DJI with all rights reserved.
No part of this Product or manual shall be reproduced in any form without the prior written consent or
authorization of DJI.
This disclaimer is produced in various languages. In the event of divergence among different versions, the
Simplified Chinese version shall prevail when the Product in question is purchased in China, and English
version shall prevail when the Product in question is purchased in any other region.
Warnings
1. The Hex Charger is only compatible with dedicated Intelligent Flight Batteries and Remote Controllers.
DO NOT attempt to use the Hex Charger with other devices.
2. Place the Hex Charger on a flat and stable surface when in use. Ensure the device is properly insulated
to prevent fire hazards.
3. DO NOT block the heat vent when using the Hex Charger to ensure that heat can be properly dissipated.
4. DO NOT attempt to touch or expose the metal terminals on the Hex Charger.
5. Clean the metal terminals with a clean, dry cloth if there is any noticeable buildup.
Introduction
The DJI Hex Charger is designed for use with dedicated Intelligent Flight Batteries and Remote Controllers.
It can charge up to six Intelligent Flight Batteries and two Remote Controllers simultaneously.
©
2016 DJI All Rights Reserved.
2
TM Hex Charger (hereinafter referred to as "Product"). Read this disclaimer