Emptying The Paper Bin; Maintenance; Technical Data; Warranty - GEHA Office X8 Anleitung

EMPTYING THE PAPER BIN

1. To empty the paper bin, set the switch to "AUTO" and pull the plug.
2. After emptying the bin, be sure to place the shredding unit on the bin in the correct position.
Note:
When the bin is full, there is the risk of jamming. Empty the bin before it is full.

MAINTENANCE

Pull the plug before any maintenance work is carried out!
• Clean the outer surface using a damp cloth. Be sure not to insert the cloth
in the feeder slot. (This step applies only to cleaning the outer parts of the device.)
• The out parts of the device are made of plastic materials.
Therefore, do not use solvents such as benzine or benzol, or any organic solvents
such as thinner. Do not clean the device using stain remover so as to prevent fading,
fissures, dissolution, or scratches.
Attention:
Be sure to prevent water from entering the device when the outer parts are being cleaned.

TECHNICAL DATA

Model
Power consumption
Cutting size
Feed width
Max. shredding capacity
Paper shredding speed
Operating period
Noise level
Net weight
Paper bin
Dimensions
DISPOSAL
The waste bin symbol indicates that electrical devices must not be disposed of with normal household
waste. Please take your device to a collection centre for electrical appliances
for recycling and proper disposal.

WARRANTY

The warranty period for your device is 24 months.
For warranty claims, you need your sales receipt. Please also keep the original packaging.
If you encounter any problems with your document shredder, please contact your dealer.
10
Shredder X8
250 W
4 x 40 mm
220 mm
8 sheets (70g A4)
4 m/min
3 min ON / 60 min OFF
73 dB
4.5 kg
15 litres
315 x 200 x 380 mm