Appendix; Charging Process - Waeco MOBITRONIC MBC-8IU Bedienungsanleitung

MBC-8IU_16IU.book Seite 44 Dienstag, 6. September 2005 3:38 15

Appendix

12 Appendix
12.1

Charging process

The compact charger charges the battery with the so-called three-stage
charge (fig. 3, page 4). The charging voltage depends on the battery to be
charged.
No. in fig. 3,
page 4
U
I
t
1
2
3
4
5
The three automatically performed stages are:
fig. 3 A, page 4: bulk charging
In the first stage, the compact charger creates the maximum charging
current. The battery is charged with this current until the absorption
voltage is attained (usually approx. 14.4 V).
The bulk charging process charges the battery up to approx. 75 % of its
capacity.
fig. 3 B, page 4: absorption charging
During the second stage the compact charger keeps the charging
voltage constant and the battery reduces the charging current gradually
because its internal resistance increases while it is being fully charged.
When the charging current drops below around a sixth of the value used
in bulk charging, the compact charger switches to retention charging.
44
Meaning
Charging voltage
Charging current
Time
Start of the charging process
Constant charging current (bulk charging)
Constant charging voltage (absorption charging)
Constant charging voltage (retention charging)
Constant charging current (retention charging)
MBC-8IU, MBC-16IU