Auerswald COMfortel DECT Headset Erweiterte Informationen Seite 18

English
2. Wearing your headset, press the call button on the headset.
3. If you do not hear a dial tone, look at the bottom panel of your base to make sure that
the configuration switch is set to the default setting A.
Note: For most phones, these standard settings will sound the best.
4. Dial a test call from the desk phone.
5. If needed, fine tune the volume with the headset volume control.
Note: You can also adjust the desk phone speaking and listening volumes on the bottom
of the base.
18
COMfortel DECT Headset - Advanced Information V04 05/2017