Button Functions And Led; Volume/Mute Button; Call Button; Headset Led - Auerswald COMfortel DECT Headset Erweiterte Informationen

Button functions and LED

Volume/mute button

The following instructions describe the volume control if you wear the headset on the right. If
you wear it on the left, the volume control is opposite.
1. Push the button up to increase the volume.
2. Push the button down to decrease the volume.
3. Press the button down to mute/unmute the headset.
Warning: For your safety, do not use the headset at high volumes for extended peri-
ods of time. Doing so can cause hearing loss. Always listen at moderate levels.

Call button

Press the button briefly to place, answer or end a call.

Headset LED

The headset LED flashes white when in use.

Out of Range Warning Tones

If you are on a call and leave the operating range, you will hear three low tones. You will hear
a single mid tone when you are back in the operating range.
If you are not in the operating range, an active call will be suspended. When you are back in
the operating range the call will be re-established. If you remain put of the operating range
for more than five minutes the call will end and not be re-established.
COMfortel DECT Headset - Advanced Information V04 05/2017
A) Volume/mute button
B) Call button
C) Headset LED
English
13