Subscription; Automatic Secure Subscription; Manual Over-The-Air Subscription; Ending Subscription - Auerswald COMfortel DECT Headset Erweiterte Informationen

English
If you are not on a call and leave the operating range and press the call button, you will hear
a single tone for pressing the call button and three low tones for the failing connecting.
Note: Talk time will be reduced, if the headset is used constantly at a far distance from
the base.

Subscription

Automatic secure Subscription

• Place the headset into the charging cradle of the base. The power/subscription LED will
flash white.
When the subscription is established, the power/subscription LED of the base be-
comes solid white.

Manual Over-the-Air Subscription

1. With your system ready for operation and your headset undocked from the charging cra-
dle, press and hold the subscription button on the base for three seconds.
The power/subscription LED will flash white.
2. Push up and hold the volume/mute button on the headset for three seconds until the
headset LED turns solid white.
When the power/subscription LED on the base becomes solid white, the headset
and base are subscribed to one another.
Note: If the subscription process times out after two minutes or if the subscription pro-
cess fails, the power/subscription LED on the base will go dark for three seconds and
then re-illuminate steadily to indicate power is applied to the base. If this occurs, try to
re-subscribe the headset again.

Ending Subscription

Requirements:
• base in subscription mode
• Push the subscription button on the base.
14
COMfortel DECT Headset - Advanced Information V04 05/2017