Transport; Storage; Care And Maintenance; Troubleshooting - Kärcher ProPuzzi 400 Originalbetriebsanleitung

Transport

CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you transport
it.
Illustration
 Place the suction pipe onto the carrying
handle of the device.
 Wind up the mains cable and hook it
into the cable hook.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Storage

CAUTION
Risk of injury and damage! Note the weight
of the appliance in case of storage.
This appliance must only be stored in inte-
rior rooms.

Care and maintenance

DANGER
Danger of injury by electric shock.
First pull out the plug from the mains before
carrying out any tasks on the machine.
Clean the fluff filter
 Remove the lid.
 Remove the wastewater container from
the appliance.
 Regularly clean the lint trap using a
brush.
Cleaning the fresh water sieve
 Unscrew the fresh water sieve.
 Regularly clean the fresh water sieve
under running water.
Clean the spray nozzle
 Disengage and pull out nozzle mount-
ing, clean spray nozzle.

Troubleshooting

DANGER
– Danger of injury by electric shock.
First pull out the plug from the mains be-
fore carrying out any tasks on the ma-
chine.
– Get the electrical components checked
and repaired only by authorised cus-
tomer service persons.
Appliance is not working
 Check the receptacle and the fuse of
the power supply.
 Check the power cable and the power
plug of the device.
 Turn on the appliance.
No water exiting from nozzle
 Fill up fresh water reservoir.
 Check the couplings on the spray hose
for proper seating.
 Disengage and pull out nozzle mount-
ing, clean or replace spray nozzle.
 Clean the sieve in the fresh water reser-
voir.
 Spray pump defective, contact after-
sales service.
Spray stream one-sided
 Disengage and pull out nozzle mount-
ing, clean spray nozzle.
Insufficient vacuum performance
 Check the correct positioning of the lid.
 Clean seal on lid and surface on the ap-
pliance.
 Clean the fluff filter.
 Check suction hose for blockages;
clean if required.
Spray pump loud
 Fill up fresh water reservoir.
Heavy formation of foam in the
wastewater container
 Put defoaming agent (optional accesso-
ry) into the wastewater container.
– 5
EN 15