Troubleshooting - AEG DVD 4626 iP Bedienungsanleitung

iPod/iPhone Charging

Troubleshooting

Before sending the machine to the Customer Services, use the following table to check whether you can rectify the fault
yourself.
Fault Possible cause
Nothing appears on No power supply
the display
No image displayed Video cable not correctly con-
on screen nected
no DVD/CD inserted
DVD/CD not compatible
DVD/CD incorrectly placed in
CD/DVD-tray
CD/DVD is dirty
CD/DVD is damaged
Incorrect settings
The child lock system is activated
The wrong TV mode has been
selected
No picture during Incorrect video output selected.
video playback via
iPod / iPhone
CAUTION:
Return to radio mode before disconnecting your iPod/iPhone from this
device to avoid damages to your iPod/iPhone.
NOTE:
If you have an incoming call when playing back music with the iPhone
docked, then playback stops and you can hear the ring tone.
Your iPod/iPhone battery is charged as soon as the iPod/iPhone is docked.
To do this, the unit must be connected to the mains.
NOTE:
K
If the slot adapter has been supplied with your iPod, use it to ensure
that your iPod fits correctly.
K
Not all iPod/iPhone generations support the charge mode.
K
The duration of the charging process depends on the Pod/iPhone
which is used and its operating condition.
Solution
WARNING:
Before troubleshooting, switch the player off.
Put the mains plug in correctly, if necessary, check the
socket is working with another appliance.
WARNING:
Before troubleshooting, switch the player off.
Check the correct it of the Video cable
Video cable". Make sure that the jacks are tightly in the
sockets.
Insert a CD/DVD.
Use only compatible media (see
Turn the CD/DVD around.
Clean the CD/DVD around.
Use a different CD/DVD.
Check the settings of your DVD-Player.
Deactivate the child lock
Press the VIDEO button (Fig. 3/41), to change the TV mode
(interlace).
Connect the unit to your playback unit via a SCART or
S-Video cable.
ENGLISH
"Connecting the
"Technical Data").
"Parental".
65