Cleaning And Maintenance; Troubleshooting - AEG MC 4455 Bedienungsanleitung

Musik center

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

Only for CDs in MP3 format

Press once

= the current track is repeated continu-

ously (

Press twice

= the selected folder of the MP3 CD is

repeated continuously FOLDER

appears in the display). You can select

the individual folders with the buttons

FOLDER+/PRESET+ and FOLDER-/

PRESET- (6/12 on the remote control).

Press three times = the whole CD is played continuously

(

ALL appears in the display).

Press four times = the display contains the word RAN-

DOM, MP3 and the track number

that is to be played first. All tracks are

played back in random order.

Press five times = (The display shows INTRO) Each title

of the CD is played for 10 seconds.

Press six times

= the function is deactivated and the CD

is played in the normal mode.

FOLDER+/PRESET+ or FOLDER-/PRESET- (6/12)

Press these buttons during playback to select the next folder

up or down. If this button is pressed in stop mode the display

also appears briefly. Then start playback with the

(6/14).

+10 (2 on the remote control)

Press this button to jump forwards 10 tracks at a time (provided

that there are more than 10 tracks stored on the CD).

Programmed Play

This can be used to program any desired sequence of tracks.

1. Press the button (9/14).

2. Press the PROGRAM/MEMORY button (5 on the remote

control). The display shows 00-P-01. The first two digits

indicate the currently selected title and the last two digits

the current storage location. Use the / buttons (8/5

and 3/13) to select the desired track and then press the

PROGRAM/MEMORY button again. The display changes

to memory slot 00-P-02.

NOTE:

• For CDs in the MP3 format, press the buttons

FOLDER+/PRESET+ and FOLDER-/PRESET- (6/12

on the remote control) to change the folder.

• In the case of CDs in MP3 format that contain fold-

ers, when the device changes to a different folder

001 appears for the first track of the new folder.

• Up to 20 titles can be programmed. The same title

can appear more than once in the list.

3. Select the next track with the / buttons and press the

PROGRAM/MEMORY button again. Repeat the proce-

dure until all the desired tracks are selected.

appears in the display).

button

4. Press the

button (6/14). The playback starts. The

selected track numbers are shown in the display in the

correct order and the symbol or MP3 and PROG

light up.

5. Press once the button to stop the playback while retain-

ing the program.

6. When you press the button (9/11) once, playback is

stopped and the current program is erased. The PROG

control lamp goes out.

The device stops automatically once the entire sequence of

programmed tracks is completed. The abbreviation PROG

goes off and the programmed order of tracks is deleted from

the memory.

Playing back Music in MP3 Format

With this device it is possible to play back pieces of music in

MP3 format. The device also supports all standard CD types:

CD, CD-RW, CD-R.

This machine of is able to play MP3 CDs. Up to 200 tracks

can be compressed and stored on these CDs. Your machine

detects an MP3 CD automatically (the total number of tracks

and MP3s appears in the display). If you would like to play

one of these CDs, proceed as described under "Playing

CDs/MP3". Tracks can be programmed as described under

"Playing Back Programmed Tracks".

Please note:

There are a number of different recording and compression

methods, as well as quality differences between CDs and self-

recorded CDs.

Furthermore, the music industry does not adhere to fixed

standards (copy protection).

For these reasons it is possible that in rare cases there are

problems with the playback of CDs and MP3 CDs. This is not

a malfunction of the device.