Antenna Connections - AEG DVD 4626 iP Bedienungsanleitung

ENGLISH
48
Fig. 2/19
Fig. 2/17
Fig. 1/8

Antenna connections

Fig. 2/24
Inputs on the Front
Fig. 1/9
Digital
Connect the Coaxial cable for transmission of digital Audio signals to
your playback device or your amplifier.
1. Plug the Audio jack into the socket on the back of the player.
2. Plug the Audio jack into the corresponding socket on your playback
device or your amplifier.
AUX IN / LINE IN- Input
There are two options for connecting an external audio device to the
Music Center:
Connect the two audio leads for the right-hand and left-hand sound
channel to your output device.
1. Insert the audio plugs into the socket on the rear of the device.
2. Insert the audio plugs into the corresponding sockets of your output
device.
Connect your output unit using a 3.5 mm stereo TRRS connector.
1. Plug a 3.5 mm TRRS connector into the jack on the front of the unit.
2. Plug the other end of the TRRS connector cable into the correspond-
ing jack on your output unit.
NOTE:
If you have connected an external unit to both inputs, playback from
the LINE IN jack (Fig. 1/8) is preferred.
Antenna Input
This device has a built-in FM radio receiver.
K
FM reception:
Connect the cable of your antenna system to the FM socket on the
rear of the device.
USB Input
Insert a USB storage medium directly into the corresponding socket of
the device.