Set The Time; About The Dvd-Player - AEG DVD 4626 iP Bedienungsanleitung

Fig. 1/14

Set the time

Switching on the receiver
Inserting a memory card (on the left side of the unit)
Insert a MMC/SD or MS memory card into the card slot on the left side of
the unit.
1. Press the CLOCK button in standby mode (Fig. 3/2).
The popup _ _ : _ _ appears on the display.
2. Enter the time using the Numerical Buttons (Fig. 3/28).
3. Confirm your input with the SELECT button (Fig. 3/15).
Press the STANDBY button on the unit (Fig. 1/15) or on the remote con-
trol (Fig. 3/43) to switch on the unit.

About the DVD-Player

With this DVD-Player you can play a vast variety of DVD-formats
Page 40, "Technical data".
However, you must be aware that in many cases DVDs are encrypted with
a so-called "Regional Code". This specifies for which region in the world
the DVD is intended. As an example, the DVDs marked with regional code
"1" are intended for the USA and Canada. DVDs with regional code "2"
are for use in Europe.
NOTE:
With your DVD-Player you can only play DVDs with regional code "2".
There are both lots of burning and compressing methods as well as high
quality differences in (burned) CDs/DVDs. Moreover, the music industry
has not yet agreed on a fixed standard for copy protection. This may, in
very isolated cases, result in problems when relaying CDs, DVDs and MP3
CDs. This is no malfunction of the player.
Furthermore, there may be isolated problems when playing CDs or DVDs
which were created on a PC (e.g. holiday photographs). In case of prob-
lems check the settings of the DVD writing program on your computer.
You should in particular make sure that the DVD has been finalized. For
further information on this matter please refer to the operating manual
of your recorder.
Input Not Possible
If a function or input selected by you is not possible, the adjacent symbol
is shown on the screen.
ENGLISH
49