WMF KULT Pro Gebrauchsanweisung Seite 15

6. Now select the function you want:
⋅ Auto programmes: You can choose one of the programmes using the Programme button
(7). Smoothies , ice crushers
display with the relevant symbol. To start the programme, press the Start/Stop button (11). The
mixing process can be stopped at any time using the Start/Stop button.
Note: If you think the food that has been mixed is still too coarse, you can repeat the
proramme. However, be aware that the mixer should not be in operation for more than 1
minute at a time. After the mixer has been in operation for a minute you should then pause
for a minute so that it can be run on full power again afterwards.
⋅ Speeds: You can choose the speed you want on a scale from 1 to 6 using the "plus or minus
buttons" (9). To start mixing, press the Start/Stop button. The speed can be adjusted while
the mixer is in motion. The mixing process stops automatically after 1 minute, but it can be
stopped beforehand at any time using the Start/Stop button.
⋅ Pulse: When you press the Pulse button, the motor starts running at the highest speed
possible. This is especially useful for several short pulses one after the other, e.g. for mixing
layers of ingredients, loosening them or for mixing them again before pouring them out.
7. Switch off the device using the On/Off button. The display goes out.
Note: You can also stop the mixing process anytime by pushing the On/off switch.
8. Unplug the appliance from the mains before removing the mixing container from the drive unit by
turning the container in an anticlockwise direction.
9. Turn the mixing container upside-down so that the blade unit is pointing upwards.
10. Turn the blade unit in an anticlockwise direction and remove it.
Caution! Never place the blade unit with the blades pointing downwards. This can damage the
blades and scratch surfaces.
11. You can now pour out your smoothie, juice or shake. Alternatively, you can also use the mixing
container as a bottle. For this you must screw a drinking cap (13) onto the mixing container.
Using the 300 ml mixing container
The small mixing container is particularly suitable for dry ingredients. Please refer to the overview on
Page 16 for examples for use and fill quantities.
Fill and close the mixing container as described in the chapter entitled "Using the mixing containers
(500 ml and 700 ml)." Having successfully chopped up your ingredients, remove the mixing container
from the drive unit and unscrew the blade unit.
A lid (18) is supplied for storing the prepared ingredients, if desired.
Using the mixing jug (1200 ml)
1. Remove the lid (2) from the mixing jug and turn it upside-down. Then attach the desired blade unit
to the base of the jug by turning it in a clockwise direction. We recommend using the cross blade
(5). Check that the blade unit is fastened firmly to the jug and forms a tight seal.
2. Turn the jug back around and add the desired ingredients, which you have previously chopped into
small pieces. Please note the MAX mark. Always add at least 100ml of liquid (e.g. water, juice or
milk) to ensure that you get a homogeneous mixture.
Tip: First fill with the light ingredients and the liquid.
3. Place the lid on the jug. Ensure that the lid is attached firmly and the closing cap (1) is inserted
correctly. The filler opening can be used to add extra ingredients to the jug whilst mixing.
Warning! Moving blade may cause splashing!
4. Now follow instructions numbers 3-8 in the chapter entitled "Using the mixing containers (500 ml
and 700 ml)."
5. Remove the lid from the jug to pour out your freshly prepared smoothie or shake.
or chopper/grinder . The selected programme appears in the
15