Technical Specifications - EuroLite CH-4 Bedienungsanleitung

Procedure:
Step 1: Unscrew the fuseholder with a fitting screwdriver from the housing (anti-clockwise).
Step 2: Remove the old fuse from the fuseholder.
Step 3: Install the new fuse in the fuseholder.
Step 4: Replace the fuseholder in the housing and fix it.
Should you need any spare parts, please use genuine parts.
If the power supply cable of this device becomes damaged, it has to be replaced by authorized dealers only
in order to avoid hazards.
Should you have further questions, please contact your dealer.

TECHNICAL SPECIFICATIONS

Power supply:
Power consumption:
Output signal
Speed:
Maximum load:
Dimensions (WxDxH):
Weight:
Fuse:
Please note: Every information is subject to change without prior notice. 06/02 ©
230 V AC, 50 Hz ~
20 W
0/10V impulses
30 - 360 flashes/min.
5 strobes
160 x 130 x 125 mm
1.4 kg
F 0,5 A, 250 V
9