Cleaning And Maintenance; Replacing The Batteries; Spare Parts And Accessories - 3M Peltor WorkTunes ProHRXS220A Anleitungen

Store station
Press and hold the On/Off/Mode button to store station while you are in search station mode. To access your preset
preset stations.
Changing radio AM/FM band (only specific models)
Listening via the 3.5 mm external input jack
Automatic power off

CLEANING AND MAINTENANCE

NOTE:
If the hearing protector gets wet from rain or sweat, turn the earmuffs outwards, remove the cushions and foam
liners, and allow to dry before reassembly. The cushions and foam liners may deteriorate with use and should be
examined at regular intervals for cracking and leakage. When used regularly, 3M recommends replacing the foam
liners and cushions at least twice a year to maintain consistent attenuation, hygiene, and comfort. If a cushion is
damaged, it should be replaced. See Spare Parts Section below. Keep the earmuffs clean and dry and store at
normal room temperature in a clean uncontaminated area before and after use.
REMOVING AND REPLACING THE CUSHIONS
thickness of the new foam liner should correspond to the one you are replacing.
snaps in place.

REPLACING THE BATTERIES

SPARE PARTS AND ACCESSORIES

3M™ PELTOR™ HY220 Hygiene Kit
3M™ PELTOR™ HY100A Clean – Single-Use Protectors
3M™ PELTOR™ FL6CE 3.5 mm cable
8