PowerWalker VFD 400 Schnellanleitung Seite 6

EN
Computer Connection
Plug the UPS into a 2‐pole, 3‐wire grounded receptacle. Then connect one computer‐related
device into each of the power receptacles supplied on the back of the UPS.
Modem/Network Connection
Plug incoming internet line into the "In" socket at the back of the UPS. Use one more
Internet line cable and plug one end of the Internet line cable to the "Out" socket at the
back of the UPS. Plug the other end to the modem input socket as shown .
Incoming
Internet Line