Annex; Technical Data; Note - Disty distybox 300 Bedienungsanleitung

Registration / programming
Function
Reset distybox
300
distybox
The is reset to the factory settings.
300

NOTE

This means, however, that the
on a base station. All previous settings are deleted.
After unplugging / plugging in the adapter, the
restarted and reprogramming of the
Reset
parameter
distybox
The remains registered on the base station; all other
300
parameters are reset to the factory settings.
NOTE After entering the parameter, replace the handset and wait for 30
distybox
seconds. The
28
Parameter Other input
code
90 #
distybox
is no longer registered
300
distybox is
300
distybox can begin.
300
91 #
will be restarted automatically.
300
Operating Instructions

Annex

Technical data

Standard:
Frequency range:
Transmission performance: 10 mW on average
Voice transmission:
Fax mode:
Modem mode:
Dialling mode:
Connectable telephones:
CLIP:
Operating temperature:
Relative humidity:
Permissible storage
temperature:
Display unit:
Dimensions:
Weight:
Mounting location:
Power supply:
Delivery package:
Operating Instructions
distybox
300
DECT (Digital Enhanced Cordless
Telecommunications, GAP-compatible
1880 MHz to 1900 MHz
32 kbit/s ADPCM
Group 3, V.29, 9600 bit/s maximum
9600 bit/s maximum
DTMF (voice frequency signalling)
Up to three standard telephones can
be connected in parallel
Transmission via FSK1; protocol con
forms to ETSI standard
+10°C to +40°C
20 % to 75 %
-10°C to +60°C
LED
120 x 100 x 38 mm (W x H x D)
140 g
Wall mounting in interior rooms
10 V AC (0.12 A zero signal current,
0.4 A maximum); alternatively, 12 V
DC +/- 15 % = 10.2-13.8 V (0.12 A
zero signal current, 0.4 A maximum)
230 V AC, 50 Hz power supply unit,
optional adapter
29