Programming Mode; Activating Programming Mode; Setting Parameters In Programming Mode - Disty distybox 300 Bedienungsanleitung

Registration / programming

Programming mode

Programming mode on the
NOTE
within the first 10 minutes after plugging in the power supply unit.
This prevents the parameters being changed accidentally during
operation.

Activating programming mode

Proceed as follows to change the
mode:
1. Connect your telephone to the
2. Connect the power supply unit to your
3. Plug the power supply unit into a power socket. Leave the phone
on the hook for at least 30 seconds.
4. Lift the handset on your telephone. Depending on whether or not
your distybox
300
either hear a busy tone or a dialling tone.
5. On your telephone, enter:
6. You will hear a positive acknowledgement tone.
7. Optional step: Enter the PIN for the
telephone.
The PIN only needs to be entered if a new PIN has been set up
NOTE
beforehand in programming mode.
Access to programming mode can be protected using the PIN!
NOTE
8. You will hear the special dialling tone indicating that programming
mode is active.
You can now enter the parameter codes to change the relevant
features of your distybox
24
distybox
can only be activated
300
distybox
to programming
300
distybox .
300
distybox .
300
is already registered on a base station, you will
* * 9
distybox via your
300
.
300
Operating Instructions
Registration / programming
Example Let's say, for example, you want to use your
with an ISDN telephone connection. Activate programming mode as
described above in points 1-8 and then proceed as follows:
1. Enter the programming code for "Connection to an ISDN/analogue
Line": 4 0
2. To activate the feature, enter:
3. You will hear a positive acknowledgement tone, followed by the special
dialling tone once more. The feature is now active.

Setting parameters in programming mode

NOTE Not all the features offered by the
DECT/GAP base station. Refer to the operating manual for your base
station to clarify which features you can use.
Programming mode needs to be activated before this parameter can be
set. The function-programming process is concluded by entering
confirmed by the positive acknowledgement tone. You will then hear the
special dialling tone once more, which means that you can continue pro-
gramming other functions. With the exception of programming points 90,
91 and 99, the change is effective without having to restart the
distybox
.
300
If an invalid value is entered during programming, a negative acknowled-
gement tone is sounded, the procedure is cancelled and you will hear the
special dialling tone once more.
If during programming no input is made for one minute, the procedure is
cancelled and you will hear the special dialling tone again.
Programming mode can be exited at any time by replacing the handset;
the distybox will then be returned to normal mode.
300
Operating Instructions
distybox
300
distybox on a base station
300
0 #
distybox
are supported by every
300
#
and
25