Connections And Indicators; Tones - Disty distybox 300 Bedienungsanleitung

Connections and indicators

Connections and indicators
220/230V
2
50 Hz
1 Power supply
2 Power supply unit (adapter)
NOTE After plugging in the power supply unit, the handset on the
connected telephone must remain on the hook for at least 30
seconds.
NOTE Only the power unit supplied should be used. Before opening the
housing, ensure that the power supply unit is disconnected.
3 LED
I - time interval 8 sec - I
LED off
20
1
1 m
4
LED on
No power supply
Ready to use/ standby mode /
power available (220/ 230 V) /
device is registered at a base station
Incoming call alert
Connection
Programming mode (Menu)
Search for the base
Found the base
No base
Operating Instructions
Connections and indicators
3
Operating Instructions
4 Line connection
Connection for a telephone, fax
machine, answering machine or
modem. The RJ-11 socket is assigned
to the two middle connections (pins 3
and 4).

Tones

Description of the tones
Tone
(given in seconds)
Dial tone
(continous)
Special dial tone
(400/425 Hz, Dauerton)
Busy tone
(425 Hz, repeated)
Positive acknowledge
tone (single)
Negative
acknowledge tone
(single)
distybox
300
Pause
21