U.S. Robotics 9106 Kurzanleitung Seite 8

Via an Ethernet connection:
Install the yellow Ethernet cable. While networking up to four devices is
optional, additional devices should be connected after the initial setup is
complete. Insert one end of the yellow Ethernet cable into the yellow
Ethernet 1, Ethernet 2, Ethernet 3, or Ethernet 4 port on the back of the
gateway. Connect the other end of the Ethernet cable to the Ethernet port
on your computer's 10/100 network interface card (NIC). For Windows
Users only: Click Next.
Setup will detect your modem and then install the SureConnect ADSL
EasyConfigurator. This process may take a moment.
For Macintosh and Linux users: Insert the CD-ROM and follow the on-
screen instructions. Mac 10 Users: Double-click the CD icon from your
desktop, open Install.htm, and follow the on-screen instructions.
Step 4. Configure the Gateway with EasyConfigurator
NOTE: For NT 4.0 users, Service Pack 3 or later is required in order to run
EasyConfigurator.
1. The SureConnect ADSL EasyConfigurator screen will appear and prompt
you for a user name and password as demonstrated in the following
graphic:
6
6