Specifications; Additional Safety Rules For Tool; Functional Description - Makita BUB142 Betriebsanleitung

ENGLISH
1. Red part
2. Button
3. Battery cartridge
4. Pointers

SPECIFICATIONS

Capacities
No load speed (min
Overall length
Rated voltage
Intended use
The tool is intended for blowing dust.
ADDITIONAL SAFETY RULES
FOR TOOL
1. Be aware that tool is always in an operating condi-
tion, because it does not have to be plugged into
an electrical outlet.
2. Always use protective goggles, a cap and mask
when using the blower.
3. Never point the nozzle at anyone in the vicinity
when using the blower.
4. Always use the dust bag when collecting dust,
chips and the like.
5. Do not collect still smoldering cigarette ashes,
freshly cut metals shavings, screws, nails and the
like.
6. Never block suction inlet and/or blower outlet.
Increased motor revolution may cause dangerous
fan breakage.
SAVE THESE INSTRUCTIONS.
IMPORTANT SAFETY
INSTRUCTIONS
FOR BATTERY CARTRIDGE
1. Before using battery cartridge, read all instruc-
tions and cautionary markings on (1) battery
charger, (2) battery, and (3) product using battery.
2. Do not disassemble battery cartridge.
3. If operating time has become excessively shorter,
stop operating immediately. It may result in a risk
of overheating, possible burns and even an explo-
sion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short the battery cartridge:
Explanation of general view
5. Air volume adjusting dial
6. Switch trigger
7. Nozzle
8. Blower outlet
Model
Air pressure (water column)
Air volume
-1
)
Net weight
BUB142
D.C. 14.4 V
(1) Do not touch the terminals with any conduc-
BNE018-1
tive material.
(2) Avoid storing battery cartridge in a container
with other metal objects such as nails, coins,
etc.
GEB032-1
Do not expose battery cartridge to water or
(3)
rain. A battery short can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store the tool and battery cartridge in loca-
tions where the temperature may reach or exceed
50°C (122°F).
7. Do not incinerate the battery cartridge even if it is
severely damaged or is completely worn out. The
battery cartridge can explode in a fire.
8. Be careful not to drop or strike battery.
SAVE THESE INSTRUCTIONS
Tips for maintaining maximum battery life
1. Charge the battery cartridge before completely
discharged.
Always stop tool operation and charge the battery
cartridge when you notice less tool power.
2. Never recharge a fully charged battery cartridge.
Overcharging shortens the battery service life.
ENC007-2
3. Charge the battery cartridge with room tempera-
ture at 10°C - 40°C (50°F - 104°F). Let a hot battery
cartridge cool down before charging it.

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and the bat-
tery cartridge is removed before adjusting or checking
function on the tool.
Installing or removing battery cartridge
(Fig. 1)
• Always switch off the tool before insertion or removal of
the battery cartridge.
9. Dust bag
10. Suction inlet
11. Fastener
0 - 550 mm
3
0 - 2.6 m /min
0 - 18,000
509 mm
1.7 kg
BUB182
1.8 kg
D.C. 18 V
3