General Operation; Unit Selection - Velleman VTBAL29 Bedienungsanleitung

4. Features
•
compact design
•
highly accurate, overload protection
•
high-precision load cell
•
reversed LCD display
•
detachable control panel
•
units: g, oz., kg, lb., lb. oz.
•
auto power-off (90 seconds)
•
calibration function
5. Overview
Refer to the illustrations on page 2 of this manual.
1
weighing platform
2 on-off button
6. Operation
6.1 Powering the Scales
We recommend using a power adapter if you plan using the scales on a regular basis. If not, powering
the scales with batteries will suffice.
To insert the batteries, proceed as follows:
1. Open the battery compartment of the weighing platform by sliding the cover toward the outside.
2.
Insert two AAA batteries according to the correct polarity.
3.
Close the battery compartment.
Remark: Remove the batteries or disconnect from the mains if the scales will not be used for a longer
period.
The deported display does not need any powering.
Warning: Do not puncture batteries or throw them in fire as they may explode. Do not
attempt to recharge non-rechargeable batteries (alkaline). Dispose of batteries in accordance
with local regulations. Keep batteries away from children.
Replace the batteries as soon as the display shows "L-O".
6.2

General Operation

1.
Place the scales on a levelled surface.
2. Press the on-off button to switch on the scales.
3. Place the item on the platform and wait until the reading on the display is stable.
4.
Switch off the scales after use. Note that the scales will switch off automatically 90 seconds after
the last operation.
The scales are overloaded as soon as the display shows "EEEE". Remove the item from the
platform.
6.3

Unit Selection

1.
Switch on the scales.
2. Press the mode button to select the weighing unit.
V. 03 – 28/10/2015
VTBAL29
3
tare button
4 mode button
4 ©Velleman nv