Cleaning, Care And Maintenance; Troubleshooting - STIEBEL ELTRON FFB 4 EU Bedienung Und Installation

oPERATIoN

Cleaning, care and maintenance

4. Cleaning, care and maintenance
f Never use abrasive or corrosive cleaning agents. A damp f
cloth is sufficient for cleaning the appliance.
5.

Troubleshooting

Problem Cause
The required tem- Internal anti-scalding
perature is not being protection is enabled in
reached. the instantaneous water
heater.
"Con" occasionally ap- The wireless remote con-
pears on the display. trol is outside its range.
"Con" frequently appears The battery is at the end
on the display. of its capacity.
If you cannot remedy the fault, notify your qualified contractor.
To facilitate and speed up your request, provide the number from
the type plate (000000-0000).
The type plate is located at the back of the wireless remote control.
18 | FFB 4 EU
Remedy
Ask a qualified contrac-
tor to deactivate the an-
ti-scalding protection.
Reduce the distance
between the wireless
remote control and the
appliance. Resend the
temperature request.
Change the battery
(see chapter "Appliance
description / Battery
change").
www.stiebel-eltron.com