Herunterladen Diese Seite drucken

Safety Provisions; Mise Au Rebut; Caractéristiques Techniques - Conrad 35 01 11 Bedienungsanleitung

Werbung

pareil hors tension. En cas d'ouverture de couvercles ou de retrait de pièces, excep-
té si ces opérations peuvent se faire manuellement, des pièces sous tension peuvent
être mises à nu.
Les réparations doivent être réalisées uniquement par un personnel qualifié ayant été
informé des dangers liés à ces opérations ainsi que des consignes à respecter.
Il se peut que les condensateurs à l'intérieur de l'appareil soient encore chargés,
même lorsque toutes les sources d'alimentation ont été coupées.

Mise au rebut

S'il est devenu inutilisable, mettez au rebut le radio-réveil AV-316 conformément aux
dispositions légales en vigueur.
Caractéristiques techniques
Alimentation..............................: 230 V / 50 Hz c.a.
Catégorie de sécurité ..............: II
Puissance absorbée.................: 4 Watts max.Fonctionnement de la radio
Pile........................................... : pile 9 V
Gamme de fréquences.............: FM 87,5 - 108,0 MHz
AM 522 - 1620 kHz
Intensité de la pile ....................: 6,4 mA
36

Safety provisions

Any damage caused by non-compliance with the operating
instructions rule out your warranty claim! We shall not be held lia-
ble for consequential damage resulting from such non-complian-
ce.
We shall not be held liable for material or personal damage resul-
ting from improper handling or non-compliance with the safety
provisions. In such cases, any warranty claims are ruled out.
• The device has been designed according to safety class II. To maintain this condi-
tion and to ensure safe operation, it is essential for the user to comply with the
safety provisions and warning instructions contained in these Operating Instruc-
tions. For safety reasons and with regard to the homologation (CE), unauthorized
modifications and/or changes of the unit are prohibited!
• Only a 230 V/50 Hz (10/16A) socket outlet of the public electricity supply network
may be used as a voltage source.
• When used in industrial plants, the Provisions for the Prevention of Accidents of
the Association of Industrial Employers' Liability Insurance Associations for Elec-
trical Installations and Equipment must be complied with.
• Moreover, make sure that the insulation (of the housing or the power cable) is neit-
her damaged nor destroyed.
• Never spill liquids on the device! This would involve an extreme fire hazard or a
risk of fatality due to electric shocks. Should spillage have occurred nevertheless,
remove the mains plug from the socket and consult a specialist immediately.
• Make sure that no objects are inserted in the device.
• Under unfavourable light conditions, e.g. sun light, display visibility may be impai-
red considerably.
• Moreover, make sure that the insulation (of the housing or the power cable) is
neither damaged nor destroyed.
• Should you be in doubt as regards correct connection or should you have any
questions which are not clarified in these Operating Instructions, please do not
hesitate to contact our technical information service or another specialist.
17

Werbung

Kapitel

loading