Inhaltsverzeichnis
Werbung
4
SAFETY PRECAUTIONS
ONLY A CAREFUL USER IS A GOOD USER
If you follow the Safety Instructions in the manual you can avoid accidents.
MAIN PART
1) Read through carefully each section of these instructions.
2) Check the machine before every use for defect, for e.g. loose screws and bolts, loosened or damaged blades or
other parts which are not secure. It is absolutely forbidden to use the machine in improper conditions.
Therefore, before starting your machine go through the control and service instructions as recommended.
3) Before starting the machine acquaint yourself with all the parts and with the checking system.
4) The machine should only be used by adults with experience. Do not let children use it.
5) Keep people within a certain security distance as explained hereafter.
6) Only use original parts and accessories. Do not make any changes thereto.
For information, please consult your dealer.
7) Replace lost or damaged safety stickers or warning labels. Check the list of safety stickers in the "SAFETY
PRECAUTIONS" section of this manual.
Wipe dust and dirt off the stickers.
pourraient être illisibles, dégradées, ou man-quantes. Contrôler la liste des décalcomanies avec l'illustré du paragraphe
sécurité. Les maintenir propres et lisibles.
8)Keep hands and feet, as well as your body away from the moving parts.
9) Never use the machine without protection and covers in the right position and perfect condition.
10) Should an object have been run over or got stuck, stop immediately. Turn off the engine and remove the ignition key.
Disengage the P.T.O., put the attachment onto the ground and inspect it. Do not start using the machine until you are sure
that it is in perfect working order.
11) When you have finished working with the machine, disengage the P.T.O., lower the attachment so that it touches the
ground, turn off the engine and remove the key.
12) Never start the engine in a closed room. Exhaust fumes are poisonous.
13) Be careful that flames or sparks do not get near the petrol tank.
14) Never park on slopes.
15) Machine speed should be suited to the ground you are working on.
16) Working on slopes requires extreme caution and reduced speed.
17) When using the machine wear suitable clothing, glasses, gloves and any other protective clothing.
18) Only use the machine with good visibility.
19) Do not use the machine for towing.
20) Do not use the machine on the road.
21) It is strictly forbidden to start the machine if the cutter deck is not correctly mounted.
22) All drivers should receive a professional and practical training. Such training should highlight the following:
- the necessity of paying attention and being concentrated when working on machines where the driver is sitting.
- a machine sliding down a slope can be brought again under control by pulling the brakes.
The main causes for the loss of control are:
a) insufficient grip of the wheels;
b) driving too fast;
c) inadequate braking;
d) type of machine unsuitable for the job required;
e) lack of awareness of the effect of the condition of the ground, particularly of slopes ;
f) wrong attachment of the equipments and bad distribution of loads.
23) When mowing, always wear strong shoes and long trousers. Do not use the machine when you are bare-footed or
wearing sandals.
24) Inspect thoroughly the area where the machine is to be used and remove all the object that could be thrown by the
machine.
25) Stop the blade rotation before crossing non-grassy areas.
9/43
Werbung
Inhaltsverzeichnis
