Operation Of The Device; Timer; Temperature; Speed Settings - Profi Cook PC-MKM 1104 Bedienungsanleitung, Garantie

The indicator light next to the icon lights up in case of overload. The
device will then stop automatically and emit a warning sound.
Reduce the amount of ingredients in the blender and then start the
program again.

Operation of the device

• The device is equipped with safety switches. The device can only be
operated with
- the knife block installed and
- the blender installed and the lid locked or
- the blender installed and the steam attachment locked.
• Once you press a function button, the fan turns on. The fan continues
cooling the device for approx. 5 minutes after a program has stopped.
• You may select or modify parameters such as timer, temperature, and
speed while a manually set program is running.
• When the device is heating, the display will show the
• Pause a running program by pressing the START/STOP button once.
Unlocking the blender will have the same effect. All program parameters
are kept.
• The device will automatically turn off after a program has fi nished. You
will hear 10 signal sounds.
• In order to cancel a program, press and hold the START/STOP button
for 3 seconds.

Timer

• Set the operating time with the SELECT button and the control knob
Select a time of max. 90 minutes.
• The timer can only be set in combination with a speed setting. The heat-
ing option can be selected optionally.

Temperature

• Set the temperature with the SELECT button and the control knob.
Select a temperature between 30 °C and 120 °C.
• The heating function cannot be turned on separately, but can only be
activated in combination with the timer and a speed setting.

Speed settings

• Select a speed setting between 1 and 9 with the SELECT button and
the control knob.
• When a cooking program is running, you can select speed setting 5 at
most.
• You can operate the appliance separately with a selected speed set-
ting, without heating function and timer. The device stops this function
automatically after 20 minutes. Pressing the START/STOP button once
during that mode will stop rather than just pause operation.
• Use the TURBO button to briefl y apply the highest speed setting (9).
Doing so will reset the previously used speed setting. During cooking,
the TURBO button is locked and can only be used again after the heat-
ing area of the device has cooled down.

Automatic programs

• When an automatic program (AUTO) has been activated, the other
function buttons are locked.
• There are 4 automatic programs that can be selected using the AUTO
button:
Soup
Time: 22 minutes, temperature: 100 °C, speed setting: 1 and 5
After having started the program by pressing the START/STOP button,
the program will start heating. After 2, 3½ and 20½ minutes respectively
the program will stop and emit several signal sounds. You may add further
ingredients through the opening in the lid as desired. In order to continue
PC_MKM 1104_IM
operation, press the START/STOP button once respectively. If you do not
press the button, the program will continue operation after approx. 90 sec-
onds. After its fi rst interruption the program will continue to stir steadily at
speed setting 1. Regardless of any interruptions the program will stir at
speed setting 5 for the last 4½ minutes.
Jam
Time: 20 minutes, temperature: 100 °C, speed settings:
6 and 1 in intervals
After having started the program by pressing the START/STOP button,
the program will start stirring for 3 minutes at speed setting 6 and only
then start heating. The display will show the temperature. Several signal
sounds will prompt you to press the START/STOP button again. If you
do not press the button, the program will continue operation after approx.
90 seconds. It will start stirring in intervals at speed setting 1.
icon.
Sauce
Time: 26 minutes, temperature: 120 °C and 100 °C, speed setting:
1 in intervals
After having started the program by pressing the START/STOP button,
the program will start heating. After 2, 3½ and 16 minutes respectively the
program will stop and emit several signal sounds. You may add further
ingredients through the opening in the lid as desired. In order to continue
operation, press the START/STOP button once respectively. If you do
not press the button, the program will continue operation after approx.
90 seconds. It will start stirring in intervals at speed setting 1.
NOTE:
The automatic program is not suitable for preparing sauces made from
roux. Use the cooking function to prepare such sauces.
Kneading
By pressing the AUTO button four times, you can select a default knead-
ing program. Start the program with the START/STOP button.
CAUTION:
The program is suitable for heavy yeast and bread dough with a maxi-
mum of 500 g of dough. (mixing ratio fl our:water = 5:3 or 5:2).
NOTE:
• If you have just used the cooking function of the device, wait until the
heating area in the device has cooled down.
• The blender must be cold and dry.
• Do not place all ingredients in the blender at once. Start the kneading
process with fl our, sugar, and eggs only.
• Add liquids slowly during kneading. Do so by using the refi ll opening in
the lid. Insert the measuring cup with its opening facing down.

Stirring, beating, shredding, mixing, pureeing, etc.

• When processing sensitive foods that you do not want to shred, attach
the blade guard to the knife block fi rst.
• When using the stirrer, always install the stirrer with the blade guard in
the blender fi rst before fi lling in any ingredients.
• Cut large foodstuff to be shredded into smaller pieces fi rst.
Time: 5 minutes
Speed setting: 3 in intervals
No heating
19.01.16
69