Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
•
Read this sheet carefully; the execution of all works must be
performed by experienced and qualified staff with specific
technical skills, according to Standards in force on this subject in
the installation country.
•
Comply with the installation instructions provided in the following
paragraphs. The paragraphs follow a chronological order to
facilitate installation.
•
Retrieve the documents (manuals and declarations of conformity)
and the components required to complete installation from
inside the unit.
•
Aermec accessories are supplied complete with a manual for
installation and use.
•
Aermec accessories are designed to be integrated into Aermec
units both for functional aspects and safety. Our units are designed
to be integrated with Aermec additional heating accessories
and if properly fitted they have no effect on the surrounding
environment, the technical spaces are unchanged with respect to
the basic unit.
•
Before installation, check the technical spaces required:
•
for installation;
•
for connection to the hydraulic circuits and to any valve;
•
for connection to the power supply;
•
for connection of an external panel flush to the unit (when
provided for);
•
for the setup of the flow and intake ducts (for models requiring it);
•
for correct and sufficient both intake and supply air flow,
•
for draining condensation;
•
for cleaning the filters;
•
for cleaning internal components and for maintenance.
WARNINGS ON USE
•
ATTENTION: The appliance can be used by children over the
age of 8 and by people with reduced physical, sensory or mental
capabilities or without experience or necessary knowledge, as
long as they are supervised or have been instructed on the safe
use. Of the appliance and on the understanding of the dangers
inherent to it. Children must not play with the appliance. The
cleaning and maintenance to be carried out by the user must not
be carried out by children without supervision.
•
Do not use the FAN COIL improperLY
•
The fan coil must not be used to breed, deliver and raise animals.
•
AIR OUT THE ROOM
•
Periodically air out the room in which the fan coil has been
installed; this is particularly important if the room is occupied by
many people, or if there are gas appliances or sources of odours.
ADJUST THE TEMPERATURE CORRECTLY
•
•
Ambient temperature should be regulated to ensure maximum
comfort, particularly for the elderly, infants and invalids. Prevent
temperature fluctuations between indoors and outdoors greater
than 7°C during summer. Excessively low temperatures during
summer involve higher electrical consumption.
•
DIRECT THE AIR FLOW CORRECTLY
•
Air delivered by the fan coil must not be directed onto people. Even
if the air temperature is higher than the ambient temperature, it
can cause a cold sensation and, therefore, discomfort.
•
DURING OPERATION
•
During operation, always leave the filter mounted on the fan coil;
otherwise the dust in the air will dirty the coil surface.
•
IT IS NORMAL
•
When in cooling mode, water vapour can come out of the fan coil
air flow.
•
When in heating mode, a slight hissing sound can be heard
near the fan coil. The fan coil may sometimes emit unpleasant
odours due to the accumulation of substances present in the
environment (clean the filter more often, especially if the room is
not aired out regularly).
•
During operation, noise and/or a creaking sound may be heard
FCX P_PO_PV 1605 - 6456063_02
IT
EN
from inside the device, due to the heat expansion of the elements
(plastic and metal). However, this does not mean there is a
malfunction and it does not damage the unit as long as the inlet
water temperature remains within the operating limits.
•
FR
DE
ES
11
Werbung
Inhaltsverzeichnis
